Learn How to Replace Your Windshield Wipers

It’s extremely important to replace your windshield wipers. You need fresh windshield wipers that can deal with the rain, snow, and ice conditions that can happen throughout the year. Visibility is everything when it comes to driving, and you need to be aware of what’s on the road from all angles. We will show you how to change your windshield wipers so you make your driving experience much safer. Here are some tips on how to replace your windshield wipers.


Things to Do Before You Change Your Windshield Wipers

If you aren’t careful, you can easily cause damage to your window by improperly putting the wiper blade up. First of all, get a fender protector so won’t get any scratches. Make sure you have steady and strong hands to help you lift up the wipers. Check the general condition of your wipers before you even start. There should be indicators of rust or wear that show why you need to change your windshield wipers in the first place. Also, when you’re out in precipitation, you can see why your windshield wipers don’t work as effectively.

Signs You Need to Change Your Windshield Wipers

There are a few major keys that show why you need to change your windshield wipers. The first thing is water smearing. This can occur on one or both direction and is a sign of worn blades, a dirty wiper blade, or bad wiper fluid. Another big issue is water beads that won’t go away. Good wipers can easily remove water beads during even the heavy rain that occurs during your Summer season. It’s important to have good blades to clean your window because it blocks your vision from the road. It’s safety precaution that will save you from getting into a bad accident due to inclement weather. Sometimes a lot of grime gets into your wipers that can’t be thoroughly cleaned out. This only creates streak marks that severely impair your vision on the road. With a combination of water repellent and sound windshield wipers, you’ll have a much safer commute.


Steps to Replace Your Windshield Wipers

First, pull the wiper blade assembly as high as it can go. From that point, you find the clip on the wiper blade and release it. You typically press the button with your thumb and the blade should slide down. This should be enough to actually pull the wiper blade off.  Now, here’s the point where you replace the wiper blade. The same way you took it off, you put the replacement on. Make sure you hear the click sound so that you know that it’s hooked on correctly. This will ensure that it stays on tight and won’t get loose during your usage. They have a tendency to fly on when you’re driving or blow away during a storm (sometimes even scratching your window). Also, windshield wipers should be replaced in pairs to ensure both are fresh.